Maintenance & Care

AutoFloors are built as architectural surfaces under your feet. A few simple habits will keep the carving, sheen, and detail performing the way they were designed.

01. Wipe-Down as Needed

• Use a soft microfiber cloth with water or a pH-neutral cleaner, then dry.

• No polishing products are required.

02. Solid Surface Care

For carved solid surface (Corian®-type materials):

• Clean with a non-abrasive sponge and mild soap.

• Light surface marks can usually be corrected. Contact us for deep chips or damage, those should be handled by a professional.

03. Metal & Specialty Finishes

Metal and hand-applied finishes are intentionally nuanced and may develop subtle character over time.

• Use only a soft, damp microfiber cloth; dry immediately.

• Do not use polishing pastes, abrasives, “magic eraser” pads, or wire-based tools.

• Avoid prolonged contact with de-icing salts, strong cleaners, or colored liquids left to dry in carved recesses.

If you are unsure whether a product is safe, assume it isn’t and contact us first.

04. Spills & Stains

If a mark remains after gentle cleaning, send us a photo before you move to anything stronger.

• Blot spills quickly—don’t rub them deeper into the carving.

• Rinse with clean water and wipe with mild soap if needed, and dry with a clean cloth.

05. Heat, Weight & Impact

AutoFloors are engineered to handle real use, but:

• Do not place objects taken directly from open flame, welding, or intense heat on the surface.

• Avoid dropping heavy or sharp objects from height.

• Do not drag heavy metal objects across the carved areas.

Other Scenarios? Email us first.